VoiceTrack Simple (DSM-054-15) (rus)¶
{{Image("voicetrackold.png ")}}
Simple responsibility is in the recording of audio (usually voice) fragments during cross-fades from one audio element to another. Maximum performance can be achieved if the mixing console provides the possibility in its remote control interface to read the fader level control data for the DIGISPOT®II software as with broadcast mixers like DHD, AXIA or D.MAX. A special 4 Fader remote control unit can be obtained also from the DIGISPOT product line. One fader provides fade out of the first audio item, while the second fader provides the fade in of the second audio item. The start of the second audio item is initiated by the second fader start signal, so voice track recording is reminiscent of the real, live ON-AIR process. The software application will remember the fader’s movements and, while ON-AIR, it will repeat them, providing a feeling of a live show. During cross-fade rehearsal, the operator can switch on the recording process and record a voiced section that will be played through the cross-fade.
This module can easily be used without a special remote controller by using the mouse or hot keys from the keyboard but this implies some limitations as fixed fade in and fade out slopes as they are settable in the software. At present, it is possible to control the start point of the next audio item and switch the record function on and off. The schedule can be marked preliminary at the places where voice track elements are needed. Afterwards, the moderator can jump from position to position, so the voice tracks can be recorded one after another.
If in case a cross-fade does not sound in the rehearsal as expected or wanted it can be optimized by the Cross-fade Edit Module (DSM-025-15) which can be called up by just a click with the mouse. VoiceTrack Simple module requires Schedule Browser module (DSM-005-15) to be installed on the same working place.
