Rebroadcast Player (DSM-031-15) (rus)¶
{{Image("retr_eng.png")}}
Regional Frame Player (Re-Broadcaster) differs from rebroadcasting players and other players by presence of embedded switcher module, which provides change-over from the rebroadcasting signal (frame program) to the regional signal (own program). This switching can be performed either manually (from mouse/keyboard or GPI signal) or automatically at a predefined time or by command from pattern recognition module (patterns, DTMF, high frequency marks).
With the reception of a command, the switcher initiates the playback of audio material loaded into the player while simultaneously (or even earlier – depending upon the settings) fading out of the rebroadcasting signal. Thus, the system enters the own-program delivery mode. Upon the completion of the loaded block playback (or even earlier), the switcher starts fading in the rebroadcasting signal, bringing the system back to retransmission mode. Blocks of local program are loaded to player automatically. Block is loaded to the player beforehand where it waits the start command. At failure of the rebroadcasting signal the emergence Reserve player for Re-Broadcaster rebroadcasting is started. Content of the Reserve Player is kept on application restart.
Optionally:
• Second channel for the Regional Frame Player (Re-Broadcaster) (DSM-033-15)
