VoiceTrack Pro (DSM-015-15) (rus)¶
{{Image("vtr_en.png")}}
VoiceTrack Pro is intended for recording of audio (usually voice) fragments during cross-fades from one audio element to another. Maximum performance can be achieved if the mixing console provides the possibility in its remote control interface to send the fader level control data for the DIGISPOT®II software as with broadcast mixers like DHD, AXIA or D.MAX. A special 4 Fader remote control unit can be obtained also from the DIGISPOT product line. One fader provides fade out of the first audio item, while the second fader provides the fade in of the second audio item. The start of the second audio item is initiated by the second fader start signal, so voice track recording is like the real live ON-AIR process. The software application will remember the fader’s movements and, while ON-AIR, it will repeat them, providing a feeling of a live show. During cross-fade rehearsal, the operator can switch on the recording process and record a voice section that will be played through the cross-fade. It is possible to assign points in the schedule that will be used later for voice track recording which is accomplished by setting special marks. All assigned voice tracks can be recorded one after another then.
VoiceTrack Pro allows not only to record the voice, it gives also the possibility to add a jingle or opener / stinger or just an additional soundtrack to the VoiceTrack position between two songs or before the beginning of a music bed. It offers a much more versatile possibility to give the automated play out of the night time schedule the real live sounding performance. With the VoiceTrack Module a third and fourth fader will be used to add additional sounds like sound effects or jingles to the VoiceTrack element.
It is possible to assign points in the schedule that will be used later for voice track recording which is accomplished by setting special marks. All assigned voice tracks can be recorded one after another then. VoiceTrack Pro module requires Schedule Browser module (DSM-005-15) to be installed on the same working place.