Video Logger (DS-11-000-15) (rus)
{{Image("v1en.png")}}
For the news department it is a common practice to use the TV News and actual Information as source for the radio newscast. For this it is very helpful to have a workstation with video ingest possibilities for up to four channels to automatically record video signal and the related audio, whereby the audio is stored as a separate file in the MDB for direct editing with the BCS editor. On each workstation in the news department a Video Logger client is installed which provides the possibility for the journalist to access the recorded video and audio selected by the TV station and the time of transmission. *
*Video Logger (DS-11-000-15) performs simultaneous recording of several TV channels on a hard disk. Recording can be done either in manual or in full automatic mode due to a schedule. Quality of recording can be preset; e.g. audio quality can be configured to provide possibility of using these tracks later on the air. Video Logger (DS-11-000-15) consists of a block of recording modules; each of them has indication of audio and video being recorded.
The base configuration of Video Logger (DS-11-000-15) provides one channel of recording. More channels can be added optionally. Maximal number of supported channels - eight, assuming that the hardware provides the needed number of channels and required quality. Recording parameters in each of the channels can be configured individually.
Video recording formats available – MJPEG, MPEG 1/2, MPEG4. Audio formats – WAV / MPEG (PCM, Layer 2, Layer 3); sampling frequency and bit rate are defined by a user. Video Logger settings allow to define the life time of recorded material (e.g. one month). After that it will be automatically erased. Hard drive capacity and recording format define the maximal length of material that could be stored.
Options:
- Video Logger Channel (DS-00-011-15) - additional channel for video recording.
