ON-AIR Audio Logger DS-10-000-15 (rus)¶
{{Image("logger2_eng.png")}}
This module is used to record the signal from the workstation’s external to the hard disk automatically. A typical application is the around-the-clock high-compression recording of broadcast material and its subsequent long term storage (up to 8 weeks) for the content control purposes as required by the Legislation regarding mass media. Another common application is the high-quality recording of broadcast fragments for subsequent playback or for using the recorded material to prepare your own programs.
The recording panel of the application contains an extensive set of parameters. Turning recording on/off can be initiated according to a schedule, using a specific signal level at the input or by GPI command. The system can use one stereo input as two independent mono inputs and can record different programs with independent settings. It is possible to determine the compression ratio, shelf life and other parameters.
The number of recording modules present in the system is unlimited, so it is possible to set up multi channel recording of the signal.
A logger client software module can be obtained for any workstation in the radio station network system providing easy access for the program department for checking and re-use of material also to assemble sequences of commercial play out for customer reference.
Options:
- Audio Logger Channel (DS-00-010-15) - additional channel for audio recording.
